GLUEMAX Mini Dent Lifter

A compact glue pull lifter built for the finishing stage of the repair. Hold the pull, refine the metal, and perfect the panel.

Getting the dent out is only half the job. The difference between a good repair and a perfect one happens in the final pulls, and that takes control.

The DENTFIX GLUEMAX Mini Dent Lifter is built for that stage. Pull to the tension you want, then spin the locking collar down the shaft until it seats against the body. The pull holds right where you set it. With the tension locked in, you’re free to work the metal around the impact site with a Dent Fix Blending Hammer 4 PC Set (DF-BHSET), knocking down highs while the low stays supported. Or step back and check the panel from a different angle before committing to the next pull.

A built-in tab lock secures the tab to the head through every pull, with no separate adapter to buy or misplace. An engineered spring balance gives you the force you need with a smooth, controllable feel, so precision work doesn’t wear out your hand by the end of the day. 360° positioning gets the lifter where you need it, even in tight areas.

Professional results take professional tools. The GLUEMAX belongs in your box.

The GLUEMAX Mini Dent Lifter is ideal for:

• Final finishing and fine tuning of glue pull repairs
• Steel and aluminum panels
• Small to medium dents, door dings, and hail damage
• Body lines and areas with limited access
• Panels where back-side access is restricted or not practical

It’s built for collision repair shops, PDR technicians, and mobile repair specialists.

Hold the Pull
Spin the locking collar down to hold tension exactly where you set it. Your hands are free to blend the surrounding metal or inspect the repair without losing your progress.

Built-In Tab Lock
The tab locks into the head for a secure connection through every pull. It’s built into the tool, so there’s no separate adapter to buy, install, or misplace.

Built for Finishing Work
Controlled, precise pulls for the final stage of the repair, where small adjustments make the difference between close and perfect.

Pairs with Blending Tools
Hold tension while you work the highs around the impact site with a blending hammer. The Dent Fix Blending Hammer 4 PC Set (DF-BHSET) is also available.

Engineered Spring Balance
Tuned for ideal pulling resistance. It’s strong enough for maximum pulling force and smooth enough to reduce hand fatigue during all-day operation.

Built for Comfort
Optimized spring tension requires less effort on every repeated pull, reducing hand strain while improving productivity.

360° Flexible Positioning
Set the lifter at any angle around the tab to work around body lines, trim, and tight spaces.

Pull It. Lock It.
Pull to the tension you want, then lock it in place with a quick spin of the collar. Release the collar to reset for the next pull.

Designed for Professional Shops
At 2 lbs with a compact footprint, it’s a durable tool built for daily shop use.

(1) GLUEMAX Mini Dent Lifter, DF-GM600SP

• Part number: DF-GM600SP
• Weight: 2 lbs
• Dimensions (at rest): 9" H x 9" W x 3.5" D
• Height at full pull: 9.5"
• Pull travel: approx. 0.5"
• Construction: Durable, lightweight composite body with metal tab head, tab lock, shaft, and spring components
• Panel compatibility: Steel and aluminum
• Positioning: 360° rotation
• Spring: Engineered, tuned pulling resistance
• Tab retention: Built-in tab lock
• Pull lock: Locking collar

• GLUEMAX Mini Dent Lifter Operating Manual (PDF)

1. Prepare the surface. Clean the repair area and the tab face with 99% isopropyl alcohol. Glue bonds best on a panel between 75 and 90°F.
2. Glue and place the tab. Cover the tab face with glue, seat it at the center of the low, and let it cool to between 75 and 90°F before pulling.
3. Pull and hold. Engage the tab lock, pull to the tension you want, then spin the locking collar down to hold the pull while you blend highs or inspect the panel.
4. Release and clean up. Spin the collar up to release, free the tab with isopropyl alcohol, and remove leftover glue with a plastic scraper.

Always wear safety glasses. See the Operating Manual (PDF) for full instructions, temperature guidance, and troubleshooting.