THE MAXI DF-505/110V is a 110 volt single phase dent pulling station that provides the technician with the power they need to shrink, pull rocker panels, hail damage, creases, dents in hard to access areas and all types of metal damage.
The efficiency of this tool increases the workers productivity while producing a cleaner, better repair. Taking the idea of a stud welder one step further, this versatile tool will:
1. Weld pins 2. Weld a slide hammer directly to the panel 3. Weld a light pulling rod 4. Weld wiggle wire for even crease pulling 5. Weld a rod for leverage pulling 6. Shrink metal
Complete kit includes: The Maxi 110 volt unit, two light pulling rods, two slide hammer rods with strike weight, leverage puller, stud pin electrode, shrinking electrode, wiggle wire weld tip, a nine and four finger Bear Claw, 50 stud weld pins, 1 pound of wiggle wire, 21 feet of power cable, and nine feet of welding cable. Designed for use with a 20 amp breaker.
The optional DF-509 rolling cart is available separately.
Consumables: DF-503: Short Welding Rod 3 pc DF-503L: Long Welding Rod 3 pc DF-20/250: Stud Pins 2.0mm, 250 pc DF-20/500: Stud Pins 2.0mm, 500 pc DF-20: Stud Pins 2.0mm, 1,000 pc DF-26/250: Stud Pins 2.6mm, 250 pc DF-26/500: Stud Pins 2.6mm, 500 pc DF-26: Stud Pins 2.6mm, 1,000 pc DF-508: Wiggle Wire Thin, 1/2 lb DF-508TK: Wiggle Wire Thick, 1/2 lb DF-507: Wiggle Wire Thin, 1 lb DF-507TK: Wiggle Wire Thick 1 lb
The Dent Fix website and databases are all intended to be used as a GUIDE ONLY - it is important to remember that the auto body professional performing the repair is in a position to thoroughly inspect, diagnose and identify the methodology and their unique cost of the vehicle damage repair.